[Rpm-maint] Re: byte compile error

[aneeskA]

Thank You very much for this information. I will try it out and let u know.

-- anees

On Thu, May 15, 2008 at 10:01 PM, devzero2000 <pinto.elia at gmail.com> wrote:

> Without any other hint it is difficult to track down the issue.
>
> But if you think the problem is python, well, try to put
>
> %define __ os_install_post /usr/lib/rpm/brp-compress
>
> or
>
> %define __ os_install_post  %{nil}
>
> as the first define in your spec. This is for doing what you have asked
> (nostrip and the like).
>
> Best Regard
>
>
>
>
>
>
>
>
> On Thu, May 15, 2008 at 2:04 PM, aneeskA <aneeska2k5 at gmail.com> wrote:
>
>> Hi All,
>>
>>    A slight update in my issue. I have found out that the problem is being
>> is being caused by the presence of python files in that tar file. So my
>> question is whether theres any way by which i can say dont do stripping,
>> byte compiling and such stuffs which RPM does? Any help is highly
>> appreciated.
>>
>> Regards
>> -- anees
>>
>> On Thu, May 15, 2008 at 11:47 AM, aneeskA <aneeska2k5 at gmail.com> wrote:
>>
>>> Hi all,
>>>
>>>    I am trying to distribute some cross compiled files(for MIPS) as RPM.
>>> but during the RPM creation procedure 'brp-python-bytecompile: line 23'
>>> shows Segmentation fault. Any one knows if that step is essential ? Any help
>>> is highly appreciated.
>>>
>>> Regards
>>> -- anees
>>>
>>
>>
>> _______________________________________________
>> Rpm-maint mailing list
>> Rpm-maint at lists.rpm.org
>> https://lists.rpm.org/mailman/listinfo/rpm-maint
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.rpm.org/pipermail/rpm-maint/attachments/20080516/9e0c94bc/attachment-0001.htm